What Goes Into the Cost of Endaring HD Lace Extensions?
Endaring HD lace extensions take time to make because the hair is prepared and colored before individual strands are knotted onto a fine lace base by hand. From hair preparation through coloring and final hand-knotting, the process takes around four months. The same construction also explains two details you may notice when you first open your piece: shorter hairs near the roots and a soft lace edge that sometimes needs smoothing after shipping.
Why does making an HD piece take so long?
The work begins before a strand reaches the lace. The hair must be prepared and colored for the finished shade. Then each strand is passed through a small opening in the HD lace and secured by hand. The maker controls where the hair sits and how density changes across the base, with a lighter edge leading into a fuller interior.
Endaring's HD base also has soft silicone beneath the lace. Where the silicone-backed area meets the hand-tied hair, the maker must work through the lace openings while the material underneath makes access more difficult. This is one reason the hand-knotting stage requires care and time. The roughly four-month timeline describes the full preparation-to-finish process, not four months spent tying a single piece nonstop.
That time, skilled handwork and material use are what this article means by the cost of HD construction. The finished price still depends on the product and option selected; this is an explanation of how Endaring's HD pieces are made, not a claim that every hair extension is produced this way.
Why does a 16-inch HD extension start with longer hair?
For an Endaring 16-inch HD extension, the starting hair is approximately 20–22 inches long. A strand has to pass through the lace and fold back to be knotted in place, so the full starting length cannot all become the finished length that hangs down.
The folded portion is not simply lost. Two lengths of the same strand overlap in the upper part of the piece. That creates extra body and a soft shape near the base, which can support flat roots and help the added hair build from the parting. Root lift is one benefit of this construction; the fine, scalp-like lace base and controlled density also matter to how the piece blends.
Why are there shorter hairs near the roots?
Those shorter lengths are often the return hairs created where strands fold back through the lace and are tied. On an Endaring HD piece, they contribute to the fuller upper section and the transition from the lighter edge toward the denser interior. Seeing some short hair at the roots does not, by itself, mean that the hair has broken or that the piece was made incorrectly.
What if the short hairs stick up after shipping?
Packing and transit can disturb the direction of the shorter return hairs. If the piece is otherwise intact, hold the lace firmly at the knotted root area so you do not pull on the knots. On the dry, protruding hair only, use a straightener at around 150°C (300°F) in a brief, gentle pass to guide the strands back into place. Avoid repeatedly clamping the lace, silicone or clips while smoothing the hair.
Endaring's HD Clip-In care guidance also recommends heat protectant, limited heat exposure and supporting the root area while styling. If a section will not lie down after gentle handling, stop and ask for product-specific help instead of increasing the temperature or pulling harder.
What if the soft lace edge curls upward?
Endaring leaves approximately 2 mm of soft lace at the edge. With soft silicone beneath the lace, that fine edge may lift or curl during packing and transit. First lay the unworn piece flat, smooth the edge with your fingers and press only the lace edge under a book for a short period, keeping the clips and attachment areas free from the weight.
If the edge still turns up, it can be gently shaped inward from both sides and briefly warmed while held in that shape. This is a separate operation from straightening the return hairs: heat near the lace and silicone must be light and brief, never a prolonged clamp on the base. If the edge remains lifted, or the lace or silicone looks separated or torn, ask Endaring to inspect it before installing the piece.
The craft behind the finish
The longer starting hair, individual hand-knotted strands and careful work through the silicone-backed lace all contribute to the time and material behind an Endaring HD piece. They also create the root details that make HD different from a flat strip of hair: a fine lace base, a lighter edge and a fuller upper section. Once you know how those details are made, it is easier to distinguish the intended construction from something that needs attention after shipping.
Explore HD Clip-Ins for removable wear or HD Tape-In Weft for installed wear, and follow the care instructions for the specific format you choose.